Home > GRANITE SUPPLIES > CHEMICALS > ADHESIVES >

Glaxs Fast 2+1 Transparent 210 ml

GLAXS FAST 2+1 TRANSPARENT 210 ML
 
Our Price: $33.95


Product Code: 10.11.0017
Qty:

Informations
 
Informations
  • GLAXS FAST TRANSPARENT 215 ML

    GLAXS Fast Transparent 215 ml glue is made of two previously dosed components. The GLAXS Fast Transparent 215 ml is produced in a special cartridge ratio 2+1, with 2 tubes and a mixer which allows the correct extrusion of the product very easily. Once inserted in a proper guns with 2 pistons, the product is ready for use.

    Suitable to glue and to mend:

    • Stone
    • Marble
    • Granite
    • Ceramic

    GLAXS Fast Transparent 215 ml can also be used used to glue together different materials such as:

    • Marble-Marble
    • Marble-Granite
    • Stone-Ceramic

    Suitable for indoor and outdoor use.

    ADVANTAGES:

    • Zero yellowing to sun rays
    • Excellent adhesion
    • No oily effect or shadow
    • Cures very fast at low temperatures too, +1°C
    • Pre-dosed, ready-to-use system, no mixing mistakes
    • Contains zero VOC

    INSTRUCTIONS FOR USE:

    1. All the surfaces to be treated must be cleaned and free of dust and grease.
    2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
    3. Remove the threaded extremity and uncap the cartridge.
    4. Fix the mixer to the cartridge through the threaded nozzle.
    5. Before applying the glue on the surfaces, do spurge around 5 cm in line.
    6. Use only guns approved by TENAX, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
    7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

    SHELF LIFE:

    The products in cartridge will last at least 18 months in the pack and 12 months out of pack, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.

    • Gel Time Approximately: 4-5 minutes
    • Tacky Free Time: 15-20
    • Minimum Reaction Temp: +1°C
    • Temperature Range for Use After Hardening: -25°C - +60°C
    • Ratio: 2:1

Share your knowledge of this product. Be the first to write a review »